How to Add a Steam Workshop Collection to a Project Zomboid Server
Your group has made a Steam Workshop collection with every mod for the game and you want it on the server. The server doesn't understand it: you have to give it each mod separately. Here's how to get them out of the collection without missing any, what almost always goes wrong and how to test it without breaking the world.
Why the collection ID doesn't work
A Workshop collection is a list, not a mod: it has no files to download. The Project Zomboid server only downloads what you put in WorkshopItems=, and it expects the ID of each mod there. If you put the collection's ID, nothing from it is downloaded and the mods on the list don't load.
And the ID is only half of it. The server also needs each mod's Mod ID on the Mods= line (in Build 42, with a backslash in front), and the collection doesn't carry that: it's on each mod's page. How the two lists work, in the server mods guide.
Rather not set it up yourself? Project Zomboid servers from €12 a month, no contract and a full refund within 72 hours. Or create a free Project Zomboid server, no card needed.
Getting the mods out of the collection, step by step
Open the collection in your browser
Each mod in the collection has its own link. Its ID is what comes after “id=” in that link: that's the one that goes in WorkshopItems=.
Copy all the links
Open each mod in a tab and copy its address. You can paste them as they are into the mod list tool: it takes the ID out of each link and writes the WorkshopItems= line without mistakes.
Note down each Mod ID
In each mod's description, where the author writes “Mod ID: …”. If a mod has several, read which ones go together before adding them all (why, below).
Check what each mod needs
On each mod's page, “Required items” says which other mods it depends on. Whoever made the collection may have left them out: add them even if they aren't in it.
Maps go on their own line
If the collection has maps, their folder name also goes in Map=, before the base map:
Map=MapName;Muldraugh, KY. The details, in the Workshop maps guide.Restart and watch the console
The server downloads the mods when it starts. If one fails, the console says which: remove it or find a replacement before anyone joins.
What the collection doesn't tell you
Mods with several parts: many come with two or more Mod IDs that don't go together, for example a normal version and a “Lite” one, or a part for Build 41 and another for 42. If you enable them all, they clash. The mod's description usually says which to pick.
Build 41-only mods: a collection made a while ago may have mods that haven't been updated. Today's servers run Build 42 (the normal Steam version since 29 July 2026): on each mod's page, check that it says it's for 42. These work in multiplayer on 42.
Private or hidden mods: if a mod in the collection is no longer public, the server can't download it even if you can see it from your account.
Testing it without breaking the world
Don't add fifty mods at once to a game with hours of play in it. Take a backup first (how, in Project Zomboid backups) and add them in batches of ten: if something breaks, you know which batch it's in. Removing a mod that has already created items in the world can leave gaps or errors, so better to find out before you start for real.
Memory counts too: with Build 42, 6 GB at least; with more than 30 mods, 7 GB; with more than 60 or with added maps, 8 GB, and with more than 100, 10 GB (how much RAM each case needs). If you get kicked on joining with “checksums do not match”, a mod isn't the same in your game and on the server: how to find which one.
With NapNodes
In the panel you don't need to touch the .ini: in the “Mods” tab, “Add a mod” searches for each mod by name, or you paste its Workshop link under “or paste the Workshop link”. The panel reads the Mod ID from the mod's page; if it has several, they appear as checkboxes so you leave ticked the ones you want, and below, “And what it needs to work”, with whatever it's missing, to add at the same time. The panel adds the Build 42 backslash. They apply when the server restarts.
The collection link doesn't work there either: the panel will ask you for a mod's link. Go mod by mod from the collection; since it reads each page, you don't need to copy any Mod ID by hand except for mods that don't state it.
If you want to test the collection before paying anything, the free Project Zomboid server has 6 GB, Workshop mods and the same “Mods” tab, with no card. With more than 30 mods it's tight on memory: then a plan with more RAM suits you better, and when you move from the free server to a plan, “Choose your RAM” comes already worked out with your server's mods.
For your friends, the collection does help
The server can't use it, but the group can: it's the list of what the game has. Players don't need to subscribe to anything to join, because the game downloads the mods for them when they connect; even so, sharing the collection lets them see what changes and, if they want, get the download done ahead of time.
When you change a mod on the server, change it in the collection too. Otherwise the list and the server stop matching and next time someone will look for a mod that's no longer there.
Frequently asked questions
Can I put a collection ID in WorkshopItems?
No: a collection is a list, not a mod, and the server downloads nothing from it. You have to put each mod's ID, which is what comes after “id=” in the link to its page.
How do I get the IDs of every mod in a collection?
Open the collection in your browser and copy each mod's link. The mod list tool takes the ID out of each link and writes the WorkshopItems= line for you.
Where is the Mod ID of each mod in the collection?
In each mod's description, where it says “Mod ID: …”. The collection doesn't carry it. In the “Mods” tab of the NapNodes panel it's read automatically from the mod's page.
Do my friends have to subscribe to the collection to join?
No: the game downloads the server's mods for them when they connect. The collection helps them know what the game has.
How much RAM do I need for a big collection?
With Build 42, 7 GB with more than 30 mods, 8 GB with more than 60 or with added maps and 10 GB with more than 100.
Shall we set it up for you?
Project Zomboid servers from €12 a month, never oversold: your RAM is yours alone. And if you'd rather start without paying, there's a free Project Zomboid server, no card needed.
Not sure whether your server is online? Check it in a second with the Project Zomboid server status checker: players, version and password, free.
Free tool: Project Zomboid mod list. Paste Workshop links and Mod IDs and get WorkshopItems= and Mods= written correctly, with the Build 42 backslash.
Keep reading
- How to Add Mods to a Project Zomboid Server (Steam Workshop)
Steam Workshop mods on a Project Zomboid server: Workshop ID and Mod ID, servertest.ini, added maps and the “version is different than server's” error.
- How to Add Workshop Maps to a Project Zomboid Server (and Which Work on Build 42)
How to add Workshop maps (Raven Creek and others) to a Project Zomboid server: Workshop ID, Mod ID, the Map= line and which are up to date for Build 42.
- Project Zomboid crossplay: Windows, Mac, Linux and Steam Deck on one server
Can friends on Windows, Mac, Linux or Steam Deck play together on one Project Zomboid server? What has to match, how each one joins and what goes wrong.