Can't Join My Valheim Server: Causes and Fixes
You have the server and the password, but Valheim won't let you in. It's nearly always one of these: the server is off, the address has no port, a different version, the password or crossplay. Check them in this order, and the message the game shows tells you where to start.
First of all: is it on?
It sounds obvious, but it's what happens most. The first time, a Valheim server takes about 5 minutes to install, and the world is created when the first player joins. Check the status in the panel: if it says “Offline”, click “Start” and wait until the “Console” stops scrolling.
On NapNodes' free server, on top of that, it switches itself off after 1 hour with nobody on. If your friend tries at another time, it's most likely off: someone with panel access has to start it (you, or a friend you've given permission to in “Friends”).
To find out whether it responds without opening the game, try Is my Valheim server online? with its address and port: it checks from the internet, just like your friend's game would.
Rather not set it up yourself? Valheim servers from €8 a month, no contract and a full refund within 72 hours. Or create a free Valheim server, no card needed.
Depending on what the game says
“Incompatible version”
Your game and the server aren't on the same version, nearly always right after a patch. Restart the server: with “Update the game on start” (on by default) it catches up. If it persists, whoever is behind is someone's game, or a Steam beta branch. With mods, it also shows up if you don't all have the same ones. Every case, in Valheim “Incompatible Version”.
“Incorrect password”
It's case-sensitive, and on a console it's easy to slip with the on-screen keyboard: a PlayStation player couldn't get in because of that. On NapNodes, copy it with “Copy” in “Settings” → “Password to join” and pass it to your friends like that, with no trailing spaces.
“Failed to connect” or stuck connecting
First, the address: in Valheim you always type the port, after a colon (yourserver.play.napnodes.com:2456, with your server's port). Without it, the game tries the default 2456 and doesn't find yours. If the address is right and the server is on, see the next case.
“Failed to connect” right after turning crossplay off
This one is sneaky. A server that has had crossplay leaves its rooms announced on Microsoft's network (PlayFab), with its IP and port, and they're still there hours after you turn it off. Your friends' game finds them when they type the address, tries to join through them and fails without ever reaching the server. Changing the port fixes it: on a NapNodes plan, when you turn crossplay off the panel offers “Change port and restart”, and it's also under “Home” → “Address to play” → “Change port”. On the free server you can't change the port: turn crossplay back on and join with the code.
You join and get kicked a few seconds later (and the others lag out)
With crossplay on, it happens when someone joins with a VPN on their PC (Cloudflare WARP, for example): the crossplay network rebuilds itself, kicking them and cutting the others off for a moment. The server's “Console” shows error 63. Have them join without the VPN. When it rebuilds, the join code also changes: the new one appears in the “Console”.
It kicks you while loading the world
With heavily explored worlds or lots of mods it's usually lack of memory: if the “Console” shows the server restarting on its own, remove the last mod or give it more RAM (how much it needs). With mods, it also kicks you if your game doesn't have the same ones as the server.
The last one to arrive can't get in
Valheim allows at most 10 players at once; it's a limit of the game itself, not the server. If there are already 10 inside, the next one can't join until someone leaves (what you can do).
If the person who can't join plays on console or Game Pass
From PlayStation 5, Xbox, Switch 2 or the Game Pass version you can only join with the join code, and only if the server has crossplay on. On NapNodes, new Valheim servers come with it off: turn it on in “Settings” → “Crossplay (consoles and Game Pass)” and it applies after a restart.
The code appears in the server's “Console” when it starts and in the pause menu of whoever is already inside. Careful: it changes when the server restarts, so yesterday's code may not work today.
And console players can't use mods: if the server runs mods that every player has to install, they won't be able to join. It's all in Valheim crossplay.
If only one person can't join
If everyone gets in except one, the problem is on their side, not the server's. Have them try for a moment without a VPN or antivirus, and verify the game files in Steam (right-click Valheim → Properties → Installed Files → Verify integrity).
And check they haven't been left out on purpose: if the server has a whitelist (permittedlist.txt with any name inside), only the listed accounts get in, and those in bannedlist.txt never do. Both lists use the Steam ID; the SteamID64 finder gives you each friend's. How they work, in private Valheim server.
If the server is at your home
Without crossplay you have to open the server's UDP ports on the router (2456 and 2457 by default). If you open them and still nobody gets in, your ISP may have you behind CG-NAT: Valheim server ports explains it, and the Is my port open? tool checks it from outside.
With crossplay you don't need to open them, but you can't join with the local IP (192.168.x.x): anyone in the same house as the server has to join with the code.
If it still won't let you in
Copy the last lines of the “Console” right after your friend tries (that's where the version, the connections and the errors show up) and open a ticket in the panel's “Help”: with that it's quick to see what's going on.
If you're tired of it being off when someone wants to join, a plan keeps it running even with nobody on and comes with “Change port”. It's the same world: upgrading the free server to a plan deletes nothing.
Frequently asked questions
Why does Valheim say “Failed to connect” to my server?
Nearly always because the server is off or the address is missing the port (it goes after a colon). If it happens right after turning crossplay off, it's the rooms the server left announced: changing the port fixes it.
Why can't my PlayStation or Xbox friend join?
From a console you can only join with the join code and with crossplay on in the server. And if the server runs mods that have to be installed, consoles can't join.
Where do I see my server's address and port?
On NapNodes, on the “Address to play” card in “Home” and in the “ready” email. In the game you type it with the port: “Join game” → “Add server”.
Why do I get kicked a few seconds after joining?
With crossplay, it's usually a VPN on someone's PC: the network rebuilds and cuts everyone off. If it's while loading the world, it's usually lack of memory or different mods.
Shall we set it up for you?
Valheim servers from €8 a month, never oversold: your RAM is yours alone. And if you'd rather start without paying, there's a free Valheim server, no card needed.
Not sure whether your server is online? Check it in a second with the Valheim server status checker: players, version and password, free.
Free tool: Is my Valheim server online?. Type a Valheim server's address and port and see whether it responds, how many are playing and its name.
Keep reading
- Valheim Server Lag: Why It Happens and How to Fix It
Enemies teleporting and bases stuttering in Valheim: who “owns” each zone, the data rate limit, huge bases, and when it really is the server.
- Valheim Server Not Starting: Errors and Fixes
Why a Valheim server closes on startup or loads an empty world: password, world name, ports, BepInEx mods, old worlds and disk space.
- Portals on a Valheim Server: Teleporting Metals and Why They Won't Connect
How to take metals through portals on a Valheim server with the portals world modifier, no mods needed, and why a portal won't connect: tag, pairs and world.