# Can't see anything at night: darkness and night settings on a Project Zomboid server

> Which Project Zomboid server setting (Build 42) decides how dark nights are, how to make them shorter and what to do about light bulbs and the map.

Original page: https://napnodes.com/en/guides/project-zomboid-server-nights-too-dark · Updated: 2026-11-15

In Build 42, night is properly dark: without a flashlight you can't see where the street ends, and every group has someone who can only play at night. On a server the time of day is the same for everyone, so it's the world that decides, not each player. Here are the settings that matter, their defaults and three ways to set them.

## How dark it gets: Darkness during night

“Darkness during night” (NightDarkness) is how much light is left outside at night. It has four values: 1 “Pitch Black”, 2 “Dark”, 3 “Normal” (the default) and 4 “Bright”. If your group complains they can't see a thing, this is the first one to change: on 4 it still feels like night, but you can make out the streets and the zombies.

It only changes the light outside. Inside a house without power it's still dark, and a flashlight or a lamp is still what actually lights things up.

## How long it lasts: Length of nights

“Length of nights” (NightLength) splits the day between light and dark without making the whole day longer: 1 “Always Night”, 2 “Long”, 3 “Normal” (default), 4 “Short” and 5 “Always Day”. On 4, night passes sooner; on 5 there's no night, and a good part of the game's tension goes with it.

How long an in-game day is in real time and how to fit it to the hours you play, in [the server day length guide](https://napnodes.com/en/guides/project-zomboid-server-day-length).

## Zombies at night: Day/Night Zombie Speed Effect

“Day/Night Zombie Speed Effect” (ZombieLore.ActiveOnly) decides when zombies are “active”: 1 “Both” (default), 2 “Night” or 3 “Day”. Active zombies use the speed from the “Speed” setting; inactive ones are slower and tend not to give chase. On “Night”, going out by day is calmer and nights are more dangerous; on “Day”, the other way round.

Zombie speed, sight and hearing, in [the zombie settings guide](https://napnodes.com/en/guides/project-zomboid-zombie-settings).

## When the power goes: light bulbs and generators

While there's power, streetlights and house bulbs give light. Once the world's electricity is cut (14 days by default; ElecShutModifier), nights get much darker and only what you hook up to a generator gives light. How to delay the shutoff and how generators work, in [the power, water and generators guide](https://napnodes.com/en/guides/project-zomboid-power-water-shutoff-generators).

“Light Bulb Lifespan” (LightBulbLifespan) is how long bulbs last before burning out: 2 by default, from 0 to 1000. At 0 they never break: with a generator, your base has light as long as there's fuel. It doesn't affect car headlights.

## The map at night: Light Needed To Read Map

“Light Needed To Read Map” (Map.MapNeedsLight), on by default, stops you reading the map without a light source. If your group gets lost at night, turning it off helps as much as brighter nights. How to see each other on the map, in [seeing friends on the map](https://napnodes.com/en/guides/project-zomboid-see-friends-on-map-minimap).

## Three ways to set it up

1. **A group that plays at night, after work**: “Darkness during night” on 4 “Bright” and “Length of nights” on 4 “Short”. Night is still there, but it doesn't eat half your session in the dark.
2. **As it comes, without getting lost**: Everything default, except “Light Needed To Read Map” turned off. Nights are the Build 42 ones, but nobody gets lost heading back to base.
3. **Nights that scare you**: “Darkness during night” on 1 “Pitch Black”, “Day/Night Zombie Speed Effect” on 2 “Night” and “Light Bulb Lifespan” on 1. Nobody goes out at night without a plan.

## With NapNodes

They're all in “Settings”, each with its explanation: darkness and night length in “World: time and start”; light bulbs in “World: other”; the map in “The map”; and zombie activity in “Zombie lore”. The quickest way is to type “night”, “bulb” or the file name (NightDarkness) in the search box. Each setting saves on its own and applies on “Restart”, also on a world that's already running.

To try it with your group before paying anything, the [free Project Zomboid server](https://napnodes.com/en/free/project-zomboid) runs Build 42 with 6 GB and needs no card. It stops when nobody's on; for a long session, the 7-day pass keeps it running. The rest of the world settings, in [the server sandbox settings guide](https://napnodes.com/en/guides/project-zomboid-sandbox-settings).

## Questions

### How do I make nights less dark on my Project Zomboid server?

Set “Darkness during night” (NightDarkness) to 4 “Bright”. The default is 3 “Normal”. It applies when the server restarts.

### How do I make nights shorter in Project Zomboid?

Set “Length of nights” (NightLength) to 4 “Short”, or 5 “Always Day” for no nights at all. It doesn't change how long the whole day lasts.

### Can each player have their own darkness on a server?

No: on a server the time of day and how dark nights are is the same for everyone, set by the world setting.

### How do I stop light bulbs burning out?

Set “Light Bulb Lifespan” (LightBulbLifespan) to 0. The default is 2. It doesn't affect car headlights.

### Why can't I read the map at night?

Because of “Light Needed To Read Map” (Map.MapNeedsLight), on by default. Turn it off or carry a light source.

---

NapNodes gives you a free Project Zomboid server, no card and no end date: it isn't always on (it switches itself off after an hour with nobody on, and you start it again with one click). How it works: https://napnodes.com/en/free. Paid plans, always on and with no commitment: https://napnodes.com/en/pricing.
