# Project Zomboid mods not loading on your server: causes and fixes

> You added mods to your Project Zomboid server and they don't show up, or it won't start. The Build 42 causes, most common first, and how to fix each one.

Original page: https://napnodes.com/en/guides/project-zomboid-mods-not-loading-server · Updated: 2026-11-14

You've added the mods to the server, you restart, and nothing in the game. Or worse: the server hangs while starting and never opens. It's almost always one of a few causes, and nearly all of them have to do with Build 42. Here they are in order, most common first, with how to check each one.

## First: is one mod missing, or does nothing start?

These are two different problems. If the server starts and you can join but a mod does nothing, that mod isn't being loaded: go through the causes below one by one. If the server never opens the world, the last lines of the console show `World loading could not proceed, there are script load errors`: a mod fails to load or is missing another one it needs, and the world doesn't open.

In that second case, the quickest fix is to remove the last mods you added and start it again. The one that fails usually shows a bit higher up, in the lines with ERROR. If it won't start for some other reason, [the server not starting guide](https://napnodes.com/en/guides/project-zomboid-server-not-starting) goes line by line.

## 1. The mod isn't for Build 42

This is cause number one. Build 42 changed how mods are made, and many Build 41 mods that haven't been updated don't show up, or load and fail silently. On the mod's Workshop page, the author usually marks which build it's for; many have a separate Build 42 version, with a different number or "B42" in the name.

If you're coming from a Build 41 list, check all of it before pasting it: [what changes from 41 to 42](https://napnodes.com/en/guides/project-zomboid-build-42-vs-build-41).

## 2. The number and the Mod ID, swapped or misspelled

A mod is added with two different pieces of data: the Workshop number (the "id=" in its page address) on the WorkshopItems= line, and its Mod ID (the internal name the author puts in the description, "Mod ID: …") on Mods=. If they're on the wrong lines or the Mod ID has a typo, the server downloads the mod but doesn't enable it, and gives no error.

Several mods have more than one Mod ID: parts that go together, or alternative versions of the same mod (a "Lite" one and a full one). Enabling two alternative versions at once usually breaks it; its page says which ones go together.

## 3. The Build 42 backslash is missing

In Build 42, each Mod ID on the Mods= line of the .ini goes with a backslash in front: `Mods=\ProximityInventory;\RainCleansBlood`. Without it, they don't load and the server doesn't warn you. It's the most common mistake when copying a Build 41 list or an old guide. The Workshop number, on WorkshopItems=, goes without a backslash.

## 4. It's missing another mod it needs

Many mods depend on another one (a library, a tile pack for maps). On the Workshop it shows as "Required items". If it's missing, the mod doesn't load and, if another mod depends on it, that one goes down too. Add what it asks for and restart.

## 5. You used a collection's number

A Workshop collection is a list, not a mod: it has nothing to download. If you put its number on WorkshopItems=, none of its mods get downloaded. You have to add each mod on the list separately: [how to move a collection to the server](https://napnodes.com/en/guides/project-zomboid-server-workshop-collection).

## 6. It's a map and the Map= line is missing

A map needs, on top of its number and Mod ID, its folder on the Map= line, in front of the game's map: `Map=Constown, KY;Muldraugh, KY`. Without it, the mod is there but the map doesn't appear. The details, in [the Workshop maps guide](https://napnodes.com/en/guides/add-maps-project-zomboid-server).

## 7. It loads, but kicks whoever joins

If the server starts fine but players get kicked after a minute with a warning that the files don't match (in the console, `Lua/script checksums do not match`), the mods do load on the server: what doesn't match is the player's version. It happens mostly when an author updates a mod while the server is running. Restart the server and have players restart the game: [which file fails and how to fix it](https://napnodes.com/en/guides/project-zomboid-file-doesnt-match-server).

## 8. Java mods and running out of memory

Some mods aren't regular Workshop mods: they're installed by hand with Java files on the server and on each player (the ones that ask for ZombieBuddy). Those aren't added like the others.

And with lots of mods the server needs more memory: if it runs short, the system stops it just as it finishes starting and it looks like it restarts by itself. [How much RAM it needs for your mods](https://napnodes.com/en/guides/project-zomboid-server-ram).

## With NapNodes

In “Mods” you search for the mod by name or paste its Workshop link and press “Add”: the panel takes the number and the Mod ID from its page, so they can't end up on the wrong line or misspelled. The startup adds the Build 42 backslash by itself. If the mod has several parts, they show as checkboxes to choose from.

Before adding it, the panel warns you if the mod is marked for Build 41 only, if it needs another mod you don't have (and offers to add it at the same time), if it's a Java mod (those don't work on our servers) or if a Mod ID has spaces or symbols (that part can't be enabled). The order of the list barely matters. Mods apply on “Restart”; maps also go in “Settings” → “The essentials” → “Map”. If the server won't start because of a mod or runs out of memory, “Home” and “Console” explain it in plain words.

To try your list without paying anything, the [free Project Zomboid server](https://napnodes.com/en/free/project-zomboid) has 6 GB, Build 42 and doesn't ask for a card. It shuts down when nobody's on; for a long game, the 7-day pass keeps it running.

## Questions

### Why aren't the mods loading on my Project Zomboid server?

Almost always: the mod isn't for Build 42, the Workshop number and the Mod ID are on the wrong lines or misspelled, the backslash in front of each Mod ID is missing, or it's missing another mod it needs.

### What does "World loading could not proceed, there are script load errors" mean?

That a mod fails to load or is missing another one it needs, and the server never opens the world. Remove the last mods you added and start it again; the one that fails usually shows higher up, in the lines with ERROR.

### How are mods written in the Build 42 .ini?

The Workshop number on WorkshopItems=, without a backslash, and each Mod ID on Mods= with a backslash in front, separated by semicolons.

### Does mod order matter?

Barely. What does matter is that every mod a mod needs is there, and for maps, the order of the Map= line, with the game's map last.

### Can I add a whole Workshop collection?

Not with its number: a collection has no files. You have to add each mod in the collection separately.

---

NapNodes gives you a free Project Zomboid server, no card and no end date: it isn't always on (it switches itself off after an hour with nobody on, and you start it again with one click). How it works: https://napnodes.com/en/free. Paid plans, always on and with no commitment: https://napnodes.com/en/pricing.
