# Project Zomboid Max Players: How Many Your Server Holds

> How many players a Project Zomboid server allows (Build 42), how to raise MaxPlayers, how many it really handles for its RAM and what happens when it's full.

Original page: https://napnodes.com/en/guides/project-zomboid-max-players-server · Updated: 2026-11-10

There were four of you and now the Discord has twenty people who want in. Project Zomboid lets you raise the limit far beyond what most servers can handle, so the real question isn't how many it allows, but how many fit before the map starts stuttering. Here's the setting, where to change it and how much memory each group size needs.

## How many players it allows

The setting is `MaxPlayers`, in the server's .ini. It defaults to 32 and, since 42.20.3, accepts 1 to 254 players at once. Admins don't count: an admin gets in even when the server is full.

The game itself warns in the setting's description: with more than 32 there can be map loading problems and desync. It isn't a cap, it's a warning: there are servers with more people, but from there on every extra player shows.

## Changing it on a NapNodes server

No need to open the .ini: it's in “Settings” → “The essentials”, with a plain name.

1. **Open “Settings”**: In the panel, go into your Zomboid server and press “Settings”. The setting is “Players at once”, under “The essentials”.
2. **Type the number**: From 1 to 254. It saves itself: there's no save button.
3. **Restart**: It applies on restart: “Restart” in “Home”. Warn whoever's on first.

## Changing it with a command or on your PC

With the server on, an admin can type `/changeoption MaxPlayers "40"` in chat, or the same without the slash in the “Console”. If you don't remember how it goes, [the admin command generator](https://napnodes.com/en/tools/project-zomboid-admin-command-generator) writes it for you.

If you host the server at home, the .ini is in the `Zomboid/Server` folder in your user and is named after the server (`servertest.ini` if you didn't rename it). Find the line `MaxPlayers=32`, change it with the server off and start it again. Everything in that file, in [the .ini settings](https://napnodes.com/en/guides/project-zomboid-server-ini-settings).

## How many it really handles

What limits you isn't the number in the setting, but memory and how spread out you are. Each player far from the others makes the server keep another chunk of the map loaded with its zombies; ten together in a base weigh less than ten each in a different town. And every Workshop mod adds memory before anyone joins.

On NapNodes, Fuerte (6 GB) is for a group of up to 32 without mods or about 16 with Workshop mods, and Bastión (8 GB) for more than 16 with mods, more than 32 or long lists of mods and added maps. If you run short, “Buy RAM” in “My servers” adds more and “Adjust” on the server's card gives it to it, with the same world. How much to get for your case, in [the RAM guide](https://napnodes.com/en/guides/project-zomboid-server-ram).

To tell if it's tight, check “Performance” with people on and the symptoms in [server lag](https://napnodes.com/en/guides/project-zomboid-server-lag): zombies that teleport, doors that take a while to open, cars that jump.

## When the server fills up

With the server full, the game tells whoever arrives there's no room. If you'd rather they wait their turn, “Settings” → “Joining and accounts” has “Login queue”: new arrivals wait in a queue, and “Seconds waiting in the queue” (20 to 1200; 60 by default) says how long their spot is held when it's their turn.

In the same block, “Refuse logins when the server is overloaded” comes on: if the server is under heavy load, it turns away players trying to join even if there are slots. Better than letting them in and having it run badly for everyone.

To see how many are on without opening the game, [Is my Project Zomboid server online?](https://napnodes.com/en/tools/project-zomboid-server-status) tells you from the address and port; in game, `/players` shows who's connected.

## With the free server

[The NapNodes free server](https://napnodes.com/en/guides/napnodes-free-server) for Zomboid has 6 GB, like Fuerte, and the same setting in “Settings”: for a group of friends it works well, with no card.

What changes with lots of people is that it switches itself off after an hour with nobody on and you start it yourselves from the panel: a community where everyone joins at their own time needs it always on. “Move to a plan” on its card in “My servers” keeps it that way with the same world ([Zomboid server 24 hours a day](https://napnodes.com/en/guides/project-zomboid-server-24-7-always-online)). And if you want people you don't know to join, [how to get on the public list](https://napnodes.com/en/guides/project-zomboid-public-server-list).

## Questions

### How many players can a Project Zomboid server have?

From 1 to 254 at once since 42.20.3; it defaults to 32. The game warns that with more than 32 there can be map loading problems and desync, and admins don't count towards the limit.

### How do I raise the max players on my Zomboid server?

Change MaxPlayers in the server's .ini and restart. On NapNodes it's “Players at once”, in “Settings” → “The essentials”.

### How much RAM do you need for 32 players in Project Zomboid?

With Build 42, 6 GB is enough for up to 32 without mods or about 16 with Workshop mods; with mods and more people, or lots of mods and maps, 8 GB or more.

### What happens when the Zomboid server is full?

Whoever arrives can't get in, except admins. With the login queue on, they wait their turn instead of being left out.

---

NapNodes gives you a free Project Zomboid server, no card and no end date: it isn't always on (it switches itself off after an hour with nobody on, and you start it again with one click). How it works: https://napnodes.com/en/free. Paid plans, always on and with no commitment: https://napnodes.com/en/pricing.
